In Texas, paid mold work on 25 contiguous square feet or more requires a company that holds a TDLR mold license. Storm flooding often wets more than that. Call the number on this page to be connected with a local mold company in Colleyville.

How fast mold can start
Wet drywall, wood trim and padding can begin growing mold in a day or two when they stay damp. Warm weather speeds this up, and a closed, humid house after a storm gives it ideal conditions. Waiting for it to show is usually waiting too long.
Clay soil and standing water
Dry clay cracks open, and then storms dump water that runs along those cracks toward the house. Poor grading and clogged drains make it worse. The soil near the slab stays saturated long after the sky clears, and humidity inside the house climbs. Grading and clogged drains make it worse.
A lot of Colleyville's homes went up in the 1990s, with tight construction that holds moisture in after a storm. Run dehumidifiers and open the house when the weather allows.

Local details for Colleyville
Texas licenses mold assessment consultants and mold remediation contractors through TDLR. Ask which credential the company holds and confirm it on TDLR's search.
Once a regulated project passes clearance, Texas law calls for a Certificate of Mold Damage Remediation, a document worth keeping with your home and insurance records.
Remediation itself is cleanup, but putting the room back together can be permitted work; ask the contractor whether Colleyville's Building Inspections office needs to be involved.
If storm runoff or creek water got inside, FEMA's flood map service and your insurer can tell you how the address is zoned.
Calls from Colleyville are often matched with companies that also cover Hurst, Bedford and Southlake.
Comparing quotes on equal terms
A good quote lists rooms, materials, equipment and the method for drying. If one number is far below the others, find out what it leaves out. Ask each company how it would handle the same wall, the same carpet and the same attic section. Ask for the full scope.
What a company does on arrival
Expect a walk through the house, moisture readings along walls and floors, a look at the roof or entry point and possibly the attic. The company then marks what is wet, what has mold and what it would remove. You get an explanation before anything is demolished.
Do not seal the house up wet
Closing windows and running only the AC after a flood can trap humidity. EPA suggests indoor humidity below about 60 percent, ideally 30 to 50. Use a dehumidifier, move air with fans and check readings with an inexpensive hygrometer. Run the unit until readings stay steady.
Around Colleyville
Calls come in from across Colleyville, including around Pleasant Run Rd, Hall Johnson Rd, Colleyville Nature Park.
Some of the city's low-water crossings have floodgates that close during heavy rain.
Storm & Flood Mold Removal questions in Colleyville
Does bleach kill mold after a flood?
Can one company test and remove the mold?
What if hail damaged my roof but there is no stain?
Is sewage backup handled the same way?
More mold services in Colleyville
Storm & Flood Mold Removal nearby
Helpful guides
Sources
Last updated: