Mold remediation referrals for Fort Worth & nearby townsCall: (817) 518-2276
(817) 518-2276

Texas Certificate of Mold Damage Remediation explained

moldremediationfortworth.net

After a mold job in Texas, there is one piece of paper worth chasing: the Certificate of Mold Damage Remediation. This guide covers what the form says, who is supposed to give it to you, and what to do if it never shows up.

Need mold help now?
Call now to be connected with a local mold remediation company in Fort Worth.
(817) 518-2276

After a mold job in Texas, there is one piece of paper worth chasing: the Certificate of Mold Damage Remediation. This guide covers what the form says, who is supposed to give it to you, and what to do if it never shows up.

What the certificate actually is

The Certificate of Mold Damage Remediation is a Texas Department of Insurance form, numbered MDR-1. According to the Texas Department of Licensing and Regulation (TDLR) program materials, the form states that the property does not contain evidence of mold damage. It is not a general report card on your house, and it is not a warranty. It is a short statement tied to a specific property and a specific remediation project.

Because it comes out of a regulated process, it only makes sense in the context of how Texas organizes mold work. Assessment and remediation are separate trades under the same state program, and each has its own credentials. If you are still sorting out who does what, our guide to Texas mold license rules walks through the license types before you hire anyone.

Who hands it to you, and when

TDLR's program summary says the mold license holder must give the certificate to the property owner within 10 days after the project is completed. In plain terms, the paperwork is the contractor's job, not yours. You should not have to hunt for it, but you should expect to ask about it early, ideally when you compare scopes of work and before anyone signs.

A practical way to handle this is to put the question in writing before the job starts: "Will the Certificate of Mold Damage Remediation be delivered to me within 10 days of completion?" A company that works under a TDLR mold license will know exactly what you mean. If the answer is vague, treat that as information about how the rest of the job may go.

Where the certificate fits in the job sequence

The certificate sits at the end of a chain of documents. Understanding the chain helps you spot a gap before it becomes a problem.

  1. Consumer Mold Information Sheet. TDLR states that assessors and remediators must give this sheet to each client, and to the property owner if different, before any mold-related activity begins.
  2. Protocol. An assessment consultant prepares a mold remediation protocol specific to your project.
  3. Work plan. The remediation contractor writes a customized work plan that follows that protocol. TDLR says both documents must reach the client at least one calendar day before work begins.
  4. Remediation. The containment, removal and cleaning described in the work plan. Our overview of what happens during mold remediation describes the steps.
  5. Post-remediation assessment. TDLR states that a consultant who did not prepare the pre-remediation protocol conducts this step, and that clearance requires it. We cover it in post-remediation clearance testing.
  6. Certificate. The MDR-1 form, delivered to the owner within 10 days after completion.

If a job ends and you hold a work plan but no clearance paperwork and no certificate, something in the chain was skipped or is late. That is the moment to ask questions, politely and in writing.

Why a Texas homeowner might care

TDLR's FAQ points to Insurance Code section 544.303 in connection with insurers and past mold damage. We are a referral service, not an insurance adviser, and we will not interpret that section for you. What we can say is that the certificate exists because Texas decided there should be a standard, state-issued record that a remediation project was completed. Anyone who later sells, refinances, files a claim or renews a policy may be asked about a mold history, and a certificate in your files is easier to produce than a story from memory.

Keep the full packet together: the protocol, the work plan, the post-remediation assessment, the certificate and any invoices. Scan it, and store a copy somewhere that is not the house. North Texas homes change hands often, and a Fort Worth buyer or a Dallas lender will usually ask for paperwork rather than take a seller's word.

What the certificate does not do

It does not promise that moisture will never return. Mold comes back when water does, and the EPA notes that water-damaged areas and items should be dried within 24 to 48 hours to prevent mold growth. In a region with heavy summer air conditioning, hail-damaged roofs, spring flash floods and the occasional hard freeze that bursts a pipe, a clean certificate today does not protect you from a new leak next year. Fixing the water source is a separate job from the mold work, and a good scope of work should say who is responsible for it.

It also does not replace the license check. Before you hire, use the Verify a License search that TDLR offers at tdlr.texas.gov/LicenseSearch/, which covers the Mold Assessors and Remediators program. Look up the company and the individual consultant, and confirm the credential matches the work being offered.

Who is exempt, and what that means for the paperwork

Not every mold project in Texas triggers the full process. TDLR's exemptions include projects under 25 contiguous square feet, homeowner and building owner work, builder-warranty work, and certain owner or building-staff work on buildings with fewer than 10 rental units. If you clean up a small patch yourself, no license is needed and there is no certificate to receive. The EPA's own guide suggests that an area under about 10 square feet is something a homeowner can usually handle, and larger areas call for a professional.

One detail catches people out: TDLR says a remediation contractor holding a TDLR mold license is not exempt from the rules on small projects. If you hire a mold contractor who holds a TDLR license for a small job, the state rules still apply to that contractor. Ask how they will handle documents even if the patch is modest. For help deciding between doing it yourself and calling someone, see DIY mold cleanup vs hiring a pro.

If the certificate does not arrive

  • Ask in writing first. Send an email to the contractor citing the project address and completion date, and request the MDR-1 form.
  • Check the dates. Count ten days from the day the project was completed, not from the day you paid.
  • Look at the license record. Confirm who held the remediation license on your project.
  • Consider a complaint. TDLR accepts complaints about mold assessors and remediators online at tdlr.texas.gov/complaints/, generally within two years of the event. Anonymous complaints are accepted but receive no status updates, so include your contact details if you want to hear back.

Most of the time a polite reminder solves it. The complaint route exists for the cases where it does not.

Keeping the paperwork useful

Once the certificate arrives, check the basics before you file it. Does the property address match yours exactly? Is the completion date consistent with the invoice? Is the name of the license holder the one you hired? Small clerical errors are easy to fix right away and annoying to fix years later when a buyer's agent is waiting. Store a digital copy with your home records, alongside any photos you took before and after the work.

Renters and landlords

If you rent, the certificate usually goes to the property owner, since TDLR says the mold license holder delivers it to the owner. Tenants who want a copy should ask the landlord or property manager. Your repair rights are a separate matter, covered in mold in a Texas rental.

Getting started in North Texas

The covered area runs from Fort Worth across Tarrant County and into Dallas, Denton, Johnson, Parker, Ellis, Wise and Hood county towns. Whether your home is a brick-veneer house in Arlington, a newer build in Keller, or an older house closer to Dallas, the same state process applies. For a full-scope job, start with our page on mold remediation in Fort Worth, and if you need the independent assessment step, see post-remediation testing.

Call now to be connected with a local mold remediation company in Fort Worth.
(817) 518-2276

When a local company picks up, say you want the TDLR paperwork trail from start to finish, including the Certificate of Mold Damage Remediation. Companies that follow the process will answer without hesitation. You can also browse all twelve services to find the right starting point.

Frequently asked questions

What is the Certificate of Mold Damage Remediation?
It is a Texas Department of Insurance form (MDR-1) stating that the property does not contain evidence of mold damage.
Who gives me the certificate and how fast?
TDLR's program summary says the mold license holder must give it to the property owner within 10 days after the project is completed.
Do I get one if I clean up a small patch myself?
Not through that process. TDLR lists homeowner work and projects under 25 contiguous square feet among its exemptions, so no license is needed and there is no contractor to issue the form.
What if the contractor never delivers it?
Ask in writing, check the license record on TDLR's Verify a License search, and if needed file a complaint with TDLR online, generally within two years of the event.
Does the certificate mean mold cannot return?
No. It is a statement about the property after a specific project. New moisture can cause new growth, so fixing the water source matters.
Call now to be connected with a local mold remediation company in Fort Worth.
(817) 518-2276

Last updated:

☎ Call (817) 518-2276