Spots on a few vent covers are not always mold, and dust can look similar. A trained local company can tell you whether the growth reaches inside the ducts. Call the number on this page to be connected with a local mold company in Irving.

Check these spots first
Start with the closet or attic platform holding the air handler. Look under it for water, rust or a stained pan. Then check nearby ceilings for brown rings and shine a flashlight into a return grille. Photos of what you find help a company judge the job before arriving.
The condensate line is the usual suspect
Cooling the air pulls water out of it, and that water leaves through a small drain line. Algae slime and debris clog it, the pan fills, and water spills onto insulation and ceilings. Many duct and air handler mold cases in Dallas County start with this one blocked pipe.

Access and attic conditions
Working in a tight, hot attic takes longer and needs more protection for the home below. Long runs, hard-to-reach plenums and crowded framing add labor. Homes with an easy closet unit and short ducts generally have a simpler scope than a sprawling two-story layout.
Working with your HVAC contractor
A mold company cleans and removes; an air conditioning contractor repairs the equipment. Many jobs need both. Share the mold company's findings with your HVAC provider and ask them to coordinate timing so repaired parts are not reinstalled into a dirty system.
After a repair, watch for a repeat
Once the system is cleaned and fixed, keep an eye out for any musty smell for a few weeks, especially during the next humid spell. If it returns, call the same company first. A returning odor often means a moisture source is still active somewhere.
Who handles what in Irving
TDLR issues separate mold assessment and mold remediation credentials. A two-minute lookup on TDLR's search confirms the company holds the right one for the job you're hiring it to do.
Once a regulated project passes clearance, Texas law calls for a Certificate of Mold Damage Remediation, a document worth keeping with your home and insurance records.
If the job grows into replacing drywall, cabinets or framing, ask whether the rebuild needs a permit from Irving's Inspections Department.
For flood zone questions after a heavy North Texas storm, FEMA's flood maps and your insurance agent can confirm the mapped zone for an address.
Companies that take calls here usually also work in Euless, Coppell and Grapevine.
AC & Duct Mold Removal questions in Irving
What causes mold in an attic air handler?
Why does my AC smell musty only when it starts?
Will replacing the filter get rid of the smell?
Can sweating ducts cause ceiling stains?
More mold services in Irving
AC & Duct Mold Removal nearby
Helpful guides
Sources
Last updated: