AC mold is often a two-part job: cleaning the growth and fixing the water source, such as a blocked drain line or a pan that overflows. Skipping the second part invites a repeat. Call the number on this page to be connected with a local mold company in Keller.

Check these spots first
Start with the closet or attic platform holding the air handler. Look under it for water, rust or a stained pan. Then check nearby ceilings for brown rings and shine a flashlight into a return grille. Photos of what you find help a company judge the job before arriving.
Dirty filters and coils hold moisture
When filters clog, airflow drops and the coil can get too cold, frosting and then dripping heavily on the pan. Dust and film on a wet coil also provide food for growth. Regular maintenance matters most during the long cooling months across this part of Texas.
Many 2000s builds around Keller use long flex duct runs in the attic; loose connections or torn wrap on those runs are an easy place for sweating to start.

Why quotes for similar houses differ
- Size of the duct system and number of returns
- Single or multiple air handlers
- Condition of insulation and flex duct
- Whether ceilings or walls were wetted
Two neighbors on the same street can get very different numbers for these reasons alone.
Permits and license checks in Keller
Mold work in Texas is regulated by TDLR. Projects under 25 contiguous square feet can be handled without a license, but anything larger calls for a company holding a TDLR mold credential, which you can verify online.
Under TDLR rules, the assessor writes the remediation protocol, the remediator follows it with its own work plan, and a separate assessor handles the post-remediation check.
Keller's Building Services office handles building permits here, so that's the place to check before walls, cabinets or flooring go back in.
Water that came in from outside raises insurance questions; FEMA's flood map search shows whether the property sits in a mapped flood zone.
Companies that take calls here usually also work in North Richland Hills, Southlake and Roanoke.
Working with your HVAC contractor
A mold company cleans and removes; an air conditioning contractor repairs the equipment. Many jobs need both. Share the mold company's findings with your HVAC provider and ask them to coordinate timing so repaired parts are not reinstalled into a dirty system.
Do not use fogging or sprays as a shortcut
Spraying products into registers or ducts without removing the cause mostly masks the smell. EPA does not generally recommend biocides such as bleach for routine cleanup. If growth keeps returning, find the water source rather than adding another treatment on top of it.
Keller at a glance
Calls come in from across Keller, including around Heritage, Summerfields, Bear Creek Park.
The city advises staying away from creeks and low-water crossings because water can rise quickly, notably along Bear Creek.
AC & Duct Mold Removal questions in Keller
Is regular duct cleaning the same as mold removal?
Does a Texas mold license apply to AC mold?
Why does my AC smell musty only when it starts?
Does homeowners insurance cover duct mold?
More mold services in Keller
AC & Duct Mold Removal nearby
Helpful guides
Sources
Last updated: