Finding mold inside a wall starts with moisture, not the paint. A local company scans with a meter and thermal camera, then cuts a small opening where readings run high to see the back of the drywall. Call the number on this page to be connected with a local mold company in Southlake.

Signs the problem is inside the wall
Mold behind drywall rarely announces itself. Watch for paint that bubbles or peels, a baseboard that swells, a soft spot low on the wall, or a stain that returns after you paint over it. A musty smell near one wall is the same warning. Any of these deserves a call.
Windows leak at the edges
Failed caulk, worn flashing and loose frames let rain run into the wall below, usually during a hard spring storm. The water often shows up weeks later as a stain under the sill or a swollen baseboard. Because it only leaks in heavy weather, owners around Colleyville often cannot say where it comes from.
A lot of Southlake's homes went up in the 1990s, so wall trouble there tends to start at window flashing, a fixture connection or condensation rather than at age.

What shapes the price of wall mold work
The biggest factor is how much wall is wet or moldy, not how big the stain looks. A company measures the affected area with a moisture meter, and the price follows from how much drywall, insulation or trim has to come out. Ask for the scope in writing so you can compare it fairly.
What a wall check usually involves
- Questions about past leaks and storm damage
- Moisture meter readings across suspect walls
- A thermal camera scan for cool, damp areas
- A small opening cut at the highest reading
Each step narrows down where the moisture sits, so the removal plan stays as small as the damage allows.
After a storm or a long outage
When a house has been closed up without power, walls can hold moisture even if nothing looks wet. A musty smell a week later is reason enough to check, particularly near windows and bathrooms. If you have health concerns about indoor air, talk with your doctor.
Who handles what in Southlake
Mold work in Texas is regulated by TDLR. Projects under 25 contiguous square feet can be handled without a license, but anything larger calls for a company holding a TDLR mold credential, which you can verify online.
Texas generally doesn't let the same company assess and remediate the same project, so the protocol, the cleanup and the clearance check come from different businesses.
If the job grows into replacing drywall, cabinets or framing, ask whether the rebuild needs a permit from Southlake's Building Inspections office.
For flood zone questions after a heavy North Texas storm, FEMA's flood maps and your insurance agent can confirm the mapped zone for an address.
Calls from Southlake are often matched with companies that also cover Colleyville, Grapevine and Keller.
Around Southlake
Calls come in from across Southlake, including around Southlake Town Square, Bob Jones Park, E Dove Rd.
The city offers an interactive map showing whether a property sits in a mapped 100-year or 500-year floodplain or a floodway.
Mold in Walls questions in Southlake
Can mold really grow behind drywall unseen?
How long before wet drywall grows mold?
Does bleach work on wall mold?
Do I need a permit to open a wall for mold removal?
More mold services in Southlake
Mold in Walls nearby
Helpful guides
Sources
Last updated: