Mold from a leak usually grows on whatever stayed wet, such as drywall, insulation, carpet pad and baseboards. EPA advises drying wet materials within 24 to 48 hours, and porous items that stay moldy generally have to be removed. Call the number on this page to be connected with a local mold company in Haslet.

Do not wait for visible mold
Plenty of leak damage never shows black or green spots on the surface. The growth sits behind baseboards, under flooring and inside the wall cavity. If a pipe burst or a drain overflowed and things stayed damp past a couple of days, treat it as a mold risk.
Where leaks start in North Texas houses
Common sources here include slab leaks under concrete, pinhole leaks in supply lines inside walls, water heaters in garages, closets and attics, clogged AC condensate lines, and roof flashing. Each wets a different part of the house, which changes where mold tends to appear.
Rural homes far from city services often have older pipes and private lines. A leak may run a long time before the meter or bill reveals it.
Repair is a separate bill
Mold work and plumbing or roof repair are usually different jobs, often with different companies. Remediation covers drying and removing contaminated material. Fixing the pipe, drain or roof, and rebuilding walls afterward, is separate. Ask what a quote includes and what it leaves out.
Local details for Haslet
The state draws its line at 25 contiguous square feet: above that, the assessor and the remediator both need a TDLR mold license. TDLR's online search shows whether a license is current.
Once a regulated project passes clearance, Texas law calls for a Certificate of Mold Damage Remediation, a document worth keeping with your home and insurance records.
Remediation itself is cleanup, but putting the room back together can be permitted work; ask the contractor whether Haslet's Building Permits and Inspections office needs to be involved.
If storm runoff or creek water got inside, FEMA's flood map service and your insurer can tell you how the address is zoned.
Companies that take calls here usually also work in Keller, Roanoke and North Richland Hills.
Questions to ask the company
- Does the company hold a TDLR mold license?
- What is the source of the water and is it fixed?
- What will be removed and what cleaned?
- How will the area be contained?
- What does clearance involve and who performs it?
Written answers are better than verbal ones when comparing companies.
Keep indoor humidity in check
EPA suggests keeping indoor humidity below about 60 percent, ideally 30 to 50. A hygrometer costs little and tells you when a house is too damp. Run bath fans, use the AC, and add a dehumidifier in closed rooms that smell stale after a leak.
Leak & Burst Pipe Mold Removal questions in Haslet
Can mold grow after a plumbing leak in Haslet?
Does bleach kill mold after a leak?
Does Texas require a license for mold work?
Should I paint over a ceiling stain?
More mold services in Haslet
Leak & Burst Pipe Mold Removal nearby
Helpful guides
Sources
Last updated: